Supports for containers, modular offices and technical enclosures
A levelled base, prepared for placing the container or modular unit. Completed the same day as delivery.
Suitable for
Concrete scenarios where this solution works well.
Temporary site office
A container placed quickly on a levelled base, ready to use within hours. Relocatable when the site moves.
Storage container
Anchored and levelled on stable supports, with no shifting over time, easy access and no puddles under the container.
Technical room or workstation
ISO container or modular unit on a permanent or semi-permanent base at an industrial site.
Commercial or pop-up container
Café, point of sale or modular showroom, quick placement with a compliant base and a neat appearance.
What’s included
What you get when you work with Martetic on this solution category.
- Site and soil type assessment
- Installation of steel supports or point foundations
- Levelling and laser calibration
- Anchoring of the container / modular unit
- Coordination with transport / crane (if needed)
- Clean-up and handover
How it works
The main steps from order to handover, for this category.
Site and access check
We assess the ground and determine the right type of support for your container.
Installation of bearing points
Steel supports or point foundations, positioned and fixed precisely.
Container delivery and positioning
We coordinate with transport. A crane is available if needed.
Levelling, anchoring and handover
Laser calibration, anchoring, final check. The container is ready to use.
Advantages
What makes this solution better than the classic alternatives.
Fast
It can be ready the same day as the container delivery. We coordinate directly with the carrier.
Relocatable
The supports are removed when the container moves. No trace of concrete, no demolition costs.
No digging
You don't irreversibly affect the ground. Ideal for rented sites or those with limited-time use.
Compatible with any type of container
ISO 20′, 40′, high-cube, special modules, prefabricated units; we calibrate to the exact dimensions.
Products that may be considered
The options below are a starting point. The final selection is confirmed after the structure, ground, loads, connection and installation conditions.
M89 and V89, depending on the module frame and load distribution
What you need to send us
The location, dimensions, the sketch or plan, known weight or loads, photographs of the ground and the desired deadline.
What we check
The ground, access, bearing points, the connection to the structure, vertical and lateral loads and the possibility of installation.
MARTETIC Configurator
See which solution deserves to be analysed for your project
You answer a few questions about dimensions, ground and services and receive a preliminary result, without entering your phone number or email.
Frequently asked questions
What customers usually ask about this category.
Yes. We work with ISO 20′ and 40′ containers, including high-cube. We calibrate the supports to the exact corners and weight.
Standard: 4 corners. For long containers, heavily loaded surfaces or ground with level variations, we add intermediate points.
2–4 hours for a simple container on prepared ground. Longer if earthworks are needed or if there are several units.
Yes. This is one of the main advantages over a concrete foundation: the supports are removed without a trace.
The truck with the container and the crane (if applicable) must be able to enter. We assess access from the start and plan the logistics.
Describe your project
Tell us what you want to install and where. You receive a clear proposal with options.
No obligations. No hidden costs.
Request a proposal